It is hard to believe that almost a year has passed since I first began work on LILI, and now it is time to travel to Fort Worth, Texas and the Hip Pocket Theatre and turn my designs into the reality of a full stage production!
LILI opens August 14th for a four weekend run through Sept. 6.
If you are in the Fort Worth area this summer, head on out to the HPT and see the show!
Tuesday, July 14, 2015
Friday, July 3, 2015
Dog Marionettes completed
I built the two Dog marionettes back before my surgery, saving the fur coverings for afterward while I was recuperating.
Here they are completed:
PIERRE the smaller of the two at 18" high with his balancing ball. The ball has a hollow tube running through it. A string runs from nose to a ring worn by the "Trainer" who tosses the ball and raises his hand at the same time so the ball is "caught" by Pierre on the nose. A magnet holds the ball in place so the Trainer can then lower his hand and eventually snatch the ball back from the dog's nose at the end of the act.
"What You Lookin' At?"
I found this fleece-like synthetic fur which looked more like actual dog hair than standard faux fur. It is judiciously hot melt glued to the wooden body with some area's left uncovered and painted off white.
CHLOIE is Pierre's larger sister at 26" tall. Like Pierre she catches and balances a ball on her nose by the same method.
This really simple design has rendered a surprising range of "dog like" movements with just a twist or dip of the controllers. The tails are wooden beads on heavy plastic zip ties and mounted to the rump of each dog. As they walk the tails "wag" .
These were designed just as a 2 minute walk across bit while the Carnival set pieces are moved into place behind, but they turned out so well that I'm afraid they will steal the scene and the audience's hearts as well. So they may have to make another appearance at some point in the play.
Here they are completed:
PIERRE the smaller of the two at 18" high with his balancing ball. The ball has a hollow tube running through it. A string runs from nose to a ring worn by the "Trainer" who tosses the ball and raises his hand at the same time so the ball is "caught" by Pierre on the nose. A magnet holds the ball in place so the Trainer can then lower his hand and eventually snatch the ball back from the dog's nose at the end of the act.
"What You Lookin' At?"
I found this fleece-like synthetic fur which looked more like actual dog hair than standard faux fur. It is judiciously hot melt glued to the wooden body with some area's left uncovered and painted off white.
CHLOIE is Pierre's larger sister at 26" tall. Like Pierre she catches and balances a ball on her nose by the same method.
This really simple design has rendered a surprising range of "dog like" movements with just a twist or dip of the controllers. The tails are wooden beads on heavy plastic zip ties and mounted to the rump of each dog. As they walk the tails "wag" .
These were designed just as a 2 minute walk across bit while the Carnival set pieces are moved into place behind, but they turned out so well that I'm afraid they will steal the scene and the audience's hearts as well. So they may have to make another appearance at some point in the play.
Saturday, June 27, 2015
LILI - More Costume Designs!
Marcus, The Magnificent in his street clothes and "Peachlips" his on again, off again infatuation.
Rosalie, Marcus' assistant in the magic act, here in Part 1 and Part 2 outfits. I'm not trying for period accuracy here since LILI is a fantasy after all. Just a general inflection of another time and another place.
Jarnac, the Notions Vendor who tries unsuccessfully to take advantage of Lili. And Corvier, the owner of the Carnival who's primary function i9n the play version is to order the set pieces to be moved into place and the lights to be lit for the......
MAGIC ACT! Here are Marcus and Rosalie's costumes for this pivotal sequence in the show. All white and red sequins these are designed to dazzle the audiences eyes so they don't notice those two figures in back, all in black, who are actually making the "Magic" happen!
Rosalie, Marcus' assistant in the magic act, here in Part 1 and Part 2 outfits. I'm not trying for period accuracy here since LILI is a fantasy after all. Just a general inflection of another time and another place.
Jarnac, the Notions Vendor who tries unsuccessfully to take advantage of Lili. And Corvier, the owner of the Carnival who's primary function i9n the play version is to order the set pieces to be moved into place and the lights to be lit for the......
MAGIC ACT! Here are Marcus and Rosalie's costumes for this pivotal sequence in the show. All white and red sequins these are designed to dazzle the audiences eyes so they don't notice those two figures in back, all in black, who are actually making the "Magic" happen!
Wednesday, June 24, 2015
LILI - Costume Designs !
After a brief break for my cancer surgery I'm back in the final stretch of completion for my production of "LILI" opening August 14th at The Hip Pocket Theatre in Fort Worth, Texas.
Above are designs for the CARNIVAL GIRLS ( two identical young ladies who move the set pieces into place during the show ) and ACROBATS ( four Puppeteers clad all in black who adopt these and other costume pieces when they are needed on stage for prop and set movement).
LILI herself has 4 separate costume changes within the show.
Above is the plain gray dress in which she first appears in Part 1 of the play...and for Part 2 this more adult blue dress which comes to symbolize her growth as a character.
Along the way to that growth, LILI has an unfortunate encounter as a waitress for the Carnival. Her ill-fitting uniform only highlights her complete ineptitude in that job. Later when LILI has come into her own somewhat, we are treated to her dream fantasy in which she is the ultimate alluring waitress who gets to dance with MARCUS, the magician.
The four costumes above were designed with quick changes in mind. LILI will have to zip in and out of these outfits very quickly indeed in order to keep the action of the play moving.
In fact, the ill-fitting waitress costume is a breakaway designed to fit over the original gray dress and is whisked off in a flurry of comic activity leaving our heroine dazed and confused!
PAUL, the puppeteer dresses in an almost Spartan manner, but with that extra bit of tailoring his inner vanity requires. This is a good example of costume as character builder. He will loom light and simple in and around all of the colorful carnival action.
JACQUOT, his assistant and companion is a much looser and unencumbered fellow. His causal style is the perfect bridge between PAUL and LILI as they navigate the rocky road to their final dance of love which ends the play.
More this weekend...
Above are designs for the CARNIVAL GIRLS ( two identical young ladies who move the set pieces into place during the show ) and ACROBATS ( four Puppeteers clad all in black who adopt these and other costume pieces when they are needed on stage for prop and set movement).
LILI herself has 4 separate costume changes within the show.
Above is the plain gray dress in which she first appears in Part 1 of the play...and for Part 2 this more adult blue dress which comes to symbolize her growth as a character.
Along the way to that growth, LILI has an unfortunate encounter as a waitress for the Carnival. Her ill-fitting uniform only highlights her complete ineptitude in that job. Later when LILI has come into her own somewhat, we are treated to her dream fantasy in which she is the ultimate alluring waitress who gets to dance with MARCUS, the magician.
The four costumes above were designed with quick changes in mind. LILI will have to zip in and out of these outfits very quickly indeed in order to keep the action of the play moving.
In fact, the ill-fitting waitress costume is a breakaway designed to fit over the original gray dress and is whisked off in a flurry of comic activity leaving our heroine dazed and confused!
PAUL, the puppeteer dresses in an almost Spartan manner, but with that extra bit of tailoring his inner vanity requires. This is a good example of costume as character builder. He will loom light and simple in and around all of the colorful carnival action.
JACQUOT, his assistant and companion is a much looser and unencumbered fellow. His causal style is the perfect bridge between PAUL and LILI as they navigate the rocky road to their final dance of love which ends the play.
More this weekend...
Saturday, June 6, 2015
More Puppets for "LILI"
Here is my sketch for the workings of the two Dog Marionettes which feature in my production of LILI.
One Dog is roughly 22" tall and the other is smaller at just 14" tall. The two dogs are a part of a Carnival act which Lili witnesses on her first entrance into the carnival. They also feature later on in the show.
This is the smaller of the two Dogs - "Pierre", a little white poodle, seen here in his test stringing on the "gallows" ( yes, that is what it is called!) and before his fur skin has been applied. The gallows holds the controller securely at the correct height for the puppeteer which is just slightly above the waistline. A spool of black braided nylon fish line is positioned near the top which makes stringing the marionettes quite easy.
The bodies of these marionettes were fashioned from pine and cedar, carved to shape with both a skill saw and a Dremel Mototool before finally being sanded smooth by hand. I built up the musculature on each dog by applying 5mm craft foam for head, ribcage and upper legs. This will all be covered with white fleece fur after the exposed sections have been painted white.
Pierre features a moving mouth animation which adds greatly to his fidgitty nature.
A small magnet is embeded in the tip of each dog's nose and a special string runs through the nose to a ring worn by the actor playing the Dog Trainer. At the right moment the Trainer tosses a ball into the air ( hollow ball with a tube running through it, string running through the tube ) raises his hand making the string go taut which allows the ball to fall right down onto the up turned nose of the dog. The magnet holds the ball in place as the Trainer lowers his hand and let's the string go slack.
A very simple but highly effective trick sure to delight any audience!
One Dog is roughly 22" tall and the other is smaller at just 14" tall. The two dogs are a part of a Carnival act which Lili witnesses on her first entrance into the carnival. They also feature later on in the show.
This is the smaller of the two Dogs - "Pierre", a little white poodle, seen here in his test stringing on the "gallows" ( yes, that is what it is called!) and before his fur skin has been applied. The gallows holds the controller securely at the correct height for the puppeteer which is just slightly above the waistline. A spool of black braided nylon fish line is positioned near the top which makes stringing the marionettes quite easy.
The bodies of these marionettes were fashioned from pine and cedar, carved to shape with both a skill saw and a Dremel Mototool before finally being sanded smooth by hand. I built up the musculature on each dog by applying 5mm craft foam for head, ribcage and upper legs. This will all be covered with white fleece fur after the exposed sections have been painted white.
Pierre features a moving mouth animation which adds greatly to his fidgitty nature.
A small magnet is embeded in the tip of each dog's nose and a special string runs through the nose to a ring worn by the actor playing the Dog Trainer. At the right moment the Trainer tosses a ball into the air ( hollow ball with a tube running through it, string running through the tube ) raises his hand making the string go taut which allows the ball to fall right down onto the up turned nose of the dog. The magnet holds the ball in place as the Trainer lowers his hand and let's the string go slack.
A very simple but highly effective trick sure to delight any audience!
Wednesday, June 3, 2015
Even the Simple Things Need Designing
The major set pieces for LILI have all been completed. Some minor things still need to be made, like these two small step stools. Not part of my original design, I realized during assembly for the Puppet Booth that the actors who bring the Header in and attach it would need a bit of height assistance in order to do so.
So I quickly drew up this plan for the stools in a simple country style and cut them out of pine and lightweight cedar lumber.
Here the various pieces have been cut and sanded, ready for assembly.
And here is one of the stools fully assembled. I added the dowel brace underneath for extra stability. I will paint these to coordinate with the set, then disassemble and pack them flat for transport as I have with all of the rest of the set pieces.
Quite a bit of work for two props which will only be seen on stage for 30 seconds tops, but even the little touches require design, I believe.
This is also true of set dressing items such as the pillows which will be placed on the bare benches on either side of the stage when they represent the Caravans in which the actors live in the carnival. I found some commercially available pillows with texture and pattern that I liked and will use on the set, but I needed something a bit more special to go along with them.
So I found some stencil patterns that would work and used then to adorn leftover pieces of canvas as I am doing above. Sewn into a pillow with some yarn tassels at each corner and paired with the pillows i purchased, these will give a colorful and period detail to the plain benches during the show.
I will add stuffing when I get to Texas this summer so I can trasport them rolled up to save space in the van.
So I quickly drew up this plan for the stools in a simple country style and cut them out of pine and lightweight cedar lumber.
Here the various pieces have been cut and sanded, ready for assembly.
And here is one of the stools fully assembled. I added the dowel brace underneath for extra stability. I will paint these to coordinate with the set, then disassemble and pack them flat for transport as I have with all of the rest of the set pieces.
Quite a bit of work for two props which will only be seen on stage for 30 seconds tops, but even the little touches require design, I believe.
This is also true of set dressing items such as the pillows which will be placed on the bare benches on either side of the stage when they represent the Caravans in which the actors live in the carnival. I found some commercially available pillows with texture and pattern that I liked and will use on the set, but I needed something a bit more special to go along with them.
So I found some stencil patterns that would work and used then to adorn leftover pieces of canvas as I am doing above. Sewn into a pillow with some yarn tassels at each corner and paired with the pillows i purchased, these will give a colorful and period detail to the plain benches during the show.
I will add stuffing when I get to Texas this summer so I can trasport them rolled up to save space in the van.
Saturday, May 30, 2015
Balloon Props - Final
Who lurks behind them beach ball balloons?
Being the thorough fellow that I am I needed to inflate all of the beach balls almost full of air in order to glue the suction cup assembly to the bottom of each as well as check each one for any leaks, etc.
Sure enough one of the green ones wasn't holding air! I used a plastic patch kit for little kid's swimming pools and it is just fine now. This vinyl cement has to cure for 24 hours to form a strong bond to the balls.
The handles sorta look like fencing foiles, but are actually made of pine with a 1" thick dowel inside the PVC pipe grip. This allows the whole thing to be rotated on it's axis by nimbly turning the little wooden ball at the bottom. The central balloon dowel is attached in the center of the handle and the four other dowels of various heights will be glued in angled holes drilled in the larger of the two circles.
I screwed a 1/4" hex nut into the top of each dowel and cemented that in place before using epoxy resin to cement another nut on top of that one ( the epoxy really bonds the two metal nuts together ) and when dry I wrapped black electrical tape around both nuts.
Above you can see how my evil plan works. When fully inflated the "balloon" is simply screwed into the top nut securely and it stands quite firmly at attention on it's dowel "string".
TA-DA!
Both props are finished and ready to transport to Fort Worth. The "balloons" will be slightly different colors and arrangements on the two props. Once there, I will glue the four outer dowels firmly into the handle, inflate the beach balls fully and screw them in place. To hide the nut and bolt connection I will fasten some brightly colored wired ribbon to the base of each suction cup like little streamers.
If my inflation tests are any indication these should hold their air pretty much through the entire month long run of the show. If they do start to "wilt" the inflation nozzle is easily reachable on top of each ball.
Much easier to deal with than having to mess with helium before every performance, and not likely to pop!
The brackets which will hold these on the set will be fairly simple 18" X 18" wooden constructions with an outer section just wide enough in diameter to firmly hold the handle in position without tilting.
Being the thorough fellow that I am I needed to inflate all of the beach balls almost full of air in order to glue the suction cup assembly to the bottom of each as well as check each one for any leaks, etc.
Sure enough one of the green ones wasn't holding air! I used a plastic patch kit for little kid's swimming pools and it is just fine now. This vinyl cement has to cure for 24 hours to form a strong bond to the balls.
The handles sorta look like fencing foiles, but are actually made of pine with a 1" thick dowel inside the PVC pipe grip. This allows the whole thing to be rotated on it's axis by nimbly turning the little wooden ball at the bottom. The central balloon dowel is attached in the center of the handle and the four other dowels of various heights will be glued in angled holes drilled in the larger of the two circles.
I screwed a 1/4" hex nut into the top of each dowel and cemented that in place before using epoxy resin to cement another nut on top of that one ( the epoxy really bonds the two metal nuts together ) and when dry I wrapped black electrical tape around both nuts.
Above you can see how my evil plan works. When fully inflated the "balloon" is simply screwed into the top nut securely and it stands quite firmly at attention on it's dowel "string".
TA-DA!
Both props are finished and ready to transport to Fort Worth. The "balloons" will be slightly different colors and arrangements on the two props. Once there, I will glue the four outer dowels firmly into the handle, inflate the beach balls fully and screw them in place. To hide the nut and bolt connection I will fasten some brightly colored wired ribbon to the base of each suction cup like little streamers.
If my inflation tests are any indication these should hold their air pretty much through the entire month long run of the show. If they do start to "wilt" the inflation nozzle is easily reachable on top of each ball.
Much easier to deal with than having to mess with helium before every performance, and not likely to pop!
The brackets which will hold these on the set will be fairly simple 18" X 18" wooden constructions with an outer section just wide enough in diameter to firmly hold the handle in position without tilting.
Subscribe to:
Posts (Atom)









